)
A heavy-duty thickness gauge for the accurate non-invasive measurement of materials thickness. The “Ultra Measure” ultrasonic thickness gauge is robust, easy-to-use, with variable velocity calibration that can be set to suit most materials.
Thickness Gauge
ultrasonic thickness measurement
· Robust 5Mhz Transducer with split crystal protection to prevent any contamination
· Impact-resistant ABS case, industrial keypad and protective rubber boot
· 16mm diameter flat surface probe is supplied with the thickness gauge
· the standard 16mm probe can also be used to measure curved surfaces with a curvature equal to no less than approximately 40mm diameter
· Dust-tight and water-protected to IP 65 rating – protected against water jetting
· Backlit LCD display
· Inch or mm reading selection
· Simple user calibration at any time - calibrated to measure mild steel and can be re-set if required using the variable velocity + and – buttons for different materials
· Five year Instrument warranty, two year Transducer warranty
· Supplied with carry case, 5 MHz transducer, 16mm standard flat surface probe with 1.2m cable, 100ml tub of couplant gel, rubber boot, 5mm test block, operating manual, batteries & Certificate of Calibration (at 6 points)
INFO - IP CODES
IEC standard 60529 classifies the protection provided by the enclosures of equipment.
See the glossary for the full meanings of the classifications used in the standard.
Technical Specifications Range Range 1.0mm to 99.99mm / 0.045 to 4.000 inches Resolution 0.01mm / 0.001inches Accuracy ±0.1mm Power 4 x 1.5V AA alkaline batteries Dimensions 165 x 100 x 43mm Weight 300g
AV-01 Ultrasonic Material Thickness Gauge
Related Product Codes
·ATG-GEL 125ml Ultrasonic Couplant Gel·ALR-6 1.5V AA Alkaline Battery x4
| Price | VAT | ||
|---|---|---|---|
| Ultrasonic Thickness GaugeAV-01 | £595.00 | 15% | |
| Replacement Standard ProbeAUMP-01 | £135.00 | 15% |