Temperature USB Data Logger

More Views

Temperature USB Data Logger

Model No. Product Name Price Qty
EL-SIE-1 Temperature USB Data Logger
£49.99
EL-SIE-1+ High Accuracy Temperature USB Data Logger
£59.99
ALR-3-2 2 x 1.5V AAA Alkaline Batteries
£0.90
ACAL-LG Data Logger Calibration Service + Certificate
£40.00
AUKAS-LG UKAS Data Logger Calibration Service + Certificate
£82.00
OR

Be the first to review this product

No Software to Install!

The EL-SIE-1 is designed for quick and easy use with no complicated software to download and install. All essential software is contained within the unit itself, all you need is a PC or Mac, a USB cable (included) and a browser. You don't even need an active internet connection!

Monitor the environment you live and work in with the EasyLog EL-SIE-1. Configuration is simple, with no software to install on your PC or Mac – just connect the logger with a USB cable, and use your standard web browser to configure the device for logging. You don’t even need internet access to set up and use the EL-SIE-1, it really couldn’t be easier.

The logging interval can be set between 10 seconds and 24 hours, with immediate, delayed, triggered or push-to-start logging. Alarms are fully user configurable, with functionality including cumulative alarms, pre-alarms, a delay before alarm triggering, and an alarm hold option, which continues showing the alarm condition even if the reading returns to an acceptable level. The display shows current, maximum and minimum readings, and three coloured LEDs indicate device status at a glance. Once logging is complete, re-connect to your computer and use your browser to view, analyse and save your data. You can also choose to upload your data to an Easy Log Cloud account, making the data accessible online for powerful graphing, analysis and report generation.

Typical battery life is over 1 year using standard AAA alkaline batteries, and a wall mounting bracket is supplied with the device.

  • -18 to +55°C (-0.4 to +131°F) temperature measurement range
  • Stores over 1,000,000 readings (As per spec table)
  • No software to install - configure using your normal web browser
  • Use with a PC or Mac
  • Display shows current, maximum and minimum readings
  • Status and alarm indicators
  • Data can be uploaded to the EasyLog Cloud

No Complicated Software

All the software needed to configure your EL-SIE-1, and view and analyse the data it logs, is contained within the product itself. Just connect the logger to your PC or Mac with a USB cable, open any web browser and in the address bar type “http://EasyLog.local”. No internet connection is needed, and you can save this address in your bookmarks or favourites as normal.

The interface is easy to use and allows the following parameters to be configured:

  • Logger and channel names
  • Measurement units
  • Logging rate and start mode
  • Up to 16 separate alarms (high/low/pre-alarm/cumulative) with thresholds, delay and hold
  • Display and LED indicator modes

Once the logger is running, you can plug it back into your computer and see the latest data, device status and the event log. You can also choose to stop the logger and change the configuration, or just let it continue logging.

EL-SIE Software

Technical Specifications

Technical Specification
Range -18 to +55°C (-0.4 to +131°F)
Resolution 0.01°C
Accuracy ±0.2°C (±0.36°F) typical (EL-SIE-1)
±0.1°C (±0.18°F) typical (EL-SIE-1+)
Long Term Stability <0.03°C (<0.054°F) / year
Measurement Units °C, °F or K
Logging Rates 10 seconds to 24 hours, user selectable
Start Modes Immediate, push to start, delayed start, parameter triggered
Memory Capacity Over 1,000,000 total readings
Sounder Integrated alarm sounder
Power Source 2 x AAA 1.5V battery
Battery Life >1 year (at 25°C with 10 minute logging rate)
Dimensions 93 x 42 x 17 mm (excluding bracket)
Operating temperature range -18 to +55°C (-0.4 to +131°F)
Environmental rating IP4X

Calibration Options

A traceable and UKAS calibration service can be purchased for this unit. Once the Service has been performed a certificate of calibration is produced and dispatched with your order. Calibration Services are performed on receipt of your order and as such will delay shipping. Details and options are outlined below

Calibration Options
Traceable Calibration +£40.00 (issued at 4 points) -10°C, 5°C, 20°C & 40°C
Additional Points +£5.00 from -15°C to 50°C
UKAS Calibration +£82.00 (issued at 4 points) 5°C, 15°C, 25°C & 40°C
Additional Points +£10.00 from 5°C to 50°C

Product options

Data Logger Calibration Service + Certificate
UKAS Data Logger Calibration Service + Certificate